Double doors at the homes main entry are framed in aged oak with a brick surround and will require a jamb face installation with limited clearance from the main doors handle sets
.
Color matching the aged oak moldings to create the required blind stops for the installation is not an option, and switching to z-bar hinges and cap extrusions will not adapt easily to the custom brick surround.
Opting for the Designer series color match alloy stop kit eliminates the problem by tying the finish to the doors rather than the mill work. Designer Series alloy stop kits can be pre-fabricated to accommodate many installation types.
Installation starts by first installing a custom Color Matched Alloy Blind Stop Kit custom made for the opening and powder coated to match the Designer Series doors.
Hinge installation requires an off set alignment
with the blind stop to insure that the doors do not
bind between the stop and the hinge when closed.
Hanging both doors at the same time
insures perfect alignment
Standard Push Bolt Installation aligns toe to insure active door closes into the same plane for gap free operation.
Installation of the Designer Series entry hardware requires focus when drilling for the 6 hole installation. There is no room for error when 2 of the 6 holes are 7/8" each. A specialized step by step method developed specifically to limit the likelihood of errors is based on transfer dimensions insuring a trouble free hardware installation.
Design:
finish:
Screening Fabric:
Hardware:
Hardware finish:
Santa Rosa Double Entry
Oil Rubbed Bronze
Everlast1000 Brown/ Pet Proof
Estate grade lever style keyed entry
Oil Rubbed Bronze/Copper Patina
